Journal of Applied Research in Electrical Engineering

Journal of Applied Research in Electrical Engineering

Compact Two-Stage CMOS Operational Amplifier with Enhanced Gain and Bandwidth via Cascode and Negative Capacitance Techniques

Document Type : Research article

Authors
Department of Electrical and Computer Engineering, Jundi-Shapur University of Technology, Dezful, Iran
Abstract
In this research, a two-stage CMOS amplifier has been developed, characterized by high gain, extensive frequency bandwidth, and a compact chip area. The design incorporates a negative capacitor unit, a flipped voltage follower, a cascode configuration in the first stage, and a small MOSFET-based capacitor. The use of negative capacitance effectively diminishes the parasitic capacitance from the previous stage, resulting in a notable improvement in gain bandwidth. The flipped voltage follower functions as a voltage buffer within the circuit and utilizes pole-zero cancellation techniques to improve frequency bandwidth. This design enhances the amplifier's performance by effectively managing stability and response characteristics. Additionally, modifications to the input stage of the operational amplifier through a cascode structure yield a significantly high-gain amplifier. The first stage's cascode arrangement for the MOSFET drivers, along with an active load that has high output resistance, accounts for the majority of the circuit's gain. By eliminating passive capacitors and substituting them with small MOSFET-based capacitors, the proposed design effectively reduces chip area while boosting gain bandwidth. The design and simulation processes were carried out using Cadence IC Design Virtuoso software based on standard TSMC 0.18 µm CMOS technology. The results indicate that the amplifier achieves a DC gain of 80 dB, a bandwidth of 1.3 GHz, and a phase margin of 84 degrees.

Highlights

  • A cascode input stage increases DC gain while maintaining amplifier stability through the FVF compensation technique.
  • The FVF buffer provides very low output impedance and pole-zero cancellation, enhancing frequency response and phase margin.
  • MOSCAP-based NCG reduces parasitic capacitances and improves GBW.
  • Using MOSCAPs instead of passive capacitors reduces chip area to 3669 µm² and improves layout efficiency.
  • Post-layout simulations and Monte Carlo analysis show robust performance with stable gain (~80 dB) and phase margin (~79°) under ±10% process variations.

 

Keywords
Subjects

Volume 4, Issue 1
Winter and Spring 2025
January 2025
Pages 86-93

  • Receive Date 24 December 2024
  • Revise Date 06 December 2025
  • Accept Date 08 December 2025